Best Vacuum cleaner maintenance tips for long durability

Your vacuum cleaner does a lot to keep your home clean and fresh. However, vacuum cleaners are an investment in a homeowner’s home. As with any investment, it’s vital to take good care of it.

You can do many things to ensure your vacuum cleaner continues to work well for many years. Let’s look at seven maintenance tips that you can use to take care of your vacuum cleaner.

  1. Replace the bag regularly.

It’s one of the easiest-cum fastest ways to maintain your vacuum cleaner. First, change the bags when full. This is a common misconception. To keep your vacuum cleaner operating at its best, replace bags when they are about 1/3 full. The bag must have enough space for debris to get in. If there is too much dirt inside, the vacuum cleaner will not pick up as much as it should and won’t work as well.

You can identify signs that a bag is full or close to full by looking for them. For example, if you vacuum an area and discover debris, this is the most obvious sign. This is usually due to the bag being full and the debris getting re-deposited onto the carpet. You may also notice that your vacuum cleaner’s suction isn’t as strong or should be.

Bagless vacuum cleaners allow you to see exactly how much dirt and debris are trapped within the machine. In addition, you will be able to see the canister’s contents, which will allow you to avoid the above problems and maintain your vacuum cleaner.

  2. Check that the bag is securely attached.

Although it sounds simple, many brands, models, and types of vacuum cleaners are available. Unfortunately, this can make attaching the bag a little more difficult. This is especially true for folks doing this for the first time.

Although the methods of attaching bags will vary from one model to the next, one thing is constant: you must ensure that the bag’s opening is secured to the nozzle. Next, attach any clips, hooks, holders, or holders securely to the bag.

You might find that the bag isn’t securely attached, and debris fills your vacuum cleaner. In addition, the cleaner could be damaged as the vacuum cleaner’s moving parts will not work as well as they should. It is almost impossible to clean the cleaner completely once this happens.

You need to attach the bag correctly to your vacuum cleaner. There are many models available for vacuum cleaners. You might think you have the right one, but you may not. This could lead to the bag not being as secure as you expected. To avoid buying a bag that isn’t working, check the reference number on your computer and compare it with the one on the bag.

Stock up on bags once you have found the perfect bag. There are so many vans to choose from every year. 

  3. Models that are not bagless often.

Although I have already briefly mentioned this point, I want you to know that it is important to empty your bagless vacuum of dirt and debris as often as you can.

Bagless machines often have a marking that indicates when the receptacle should be empty. Although this is useful, emptying the receptacle after use is good. It is best to empty it after each use. Do not allow dirt or debris to settle in the unit. You may need to rinse the unit with water depending on which bagless unit it is.

You’ll need to clean the filter as well when you empty it. To loosen any debris or small particles stuck inside, you can gently push the filter against the trash. You can then use your finger or another object to clean the filter. Although it is unnecessary to get rid of dirt, a general cleaning can make the filter work better. 

  4. Clean the brush roll

You might want to inspect the brush roll off your vacuum now and again. Some items can become stuck to the brush rollover time and prevent spinning properly. This includes floss, hair, string, and so on.

These objects can be removed from the vacuum while still in place, or you can take them out. If you are comfortable doing so, I recommend removing the roll from the vacuum. It’s possible to give the vacuum a deeper clean by removing the roll, but it’s not worth it if it’s impossible to get it back on.

Although it may vary from one model to the next, most vacuum cleaners have a roller attached by a plate. First, lift the plate off and then slide your rollout of the slots. After you have identified the objects on the roll, you will remove them using your fingers/scissors. You can then gently pull the objects off the roll. Finally, to ensure it’s as clean as possible, you might wash it with soap and water.

Once you have removed the brush roll from the vacuum, you can clean the roller’s bearings and caps. If not damaged, you can clean the area with a damp cloth.

  5. The Belt

You may need to inspect the belt that holds the brush roll in place after you have checked it. It may be time to replace the belt if it is not tight against the roll. In addition, you should check to make sure it’s not stretched, frayed, or too narrow. You should also make sure the belt isn’t moved or damaged in any particular area.

The belt should be changed every six to twelve months. However, this is not an exact number. It depends on how often one uses the vacuum cleaner and the brand and model. For example, the belt will not need to be replaced twice a year if you use your vacuum cleaner only once or twice a week. However, if you use your vacuum cleaner every day, you might need to replace it every few months.

You can replace the belt by taking off the roll and sliding the new belt on. You can find step-by-step instructions in the Instruction Manual included with your vacuum cleaner.

  6. Make sure to check the Hoses & Filters.

Many vacuum cleaners, especially newer models, come with filters that help pick up any particles that could contaminate indoor air quality. You should clean your vacuum cleaner’s filter and replace it as often as possible. A plastic filter can be rinsed, and a paper or fabric filter can be shaken, depending on its ease of removal.

It is vital to keep your filter clean. This is especially important if your vacuum cleaner has a HEPA filter. The filter improves indoor air quality. 

Sometimes, hoses can trap large objects inside. A trapped object could be the reason your hose attachment stops working. To find the object, you can either look inside the hose or stick a hook to check if it strikes something. Hoses catches common items such as socks, underwear and small toys. 

  7. Bring your vacuum to the shop.

You can take your vacuum cleaner to a vacuum shop if you cannot identify the problem. These shops are usually inexpensive and can often fix your vacuum cleaner’s problem within a few hours or the next day, depending on the issue.

The shop will replace your parts for $10 if your vacuum isn’t picking up things and the cause. Prices vary depending on individual shop rates and what the problem is. Depending on its age, it may be worth hiring someone to fix your vacuum cleaner. It’s often easier to purchase a new vacuum cleaner. Multiple models are comprising new technologies, like robot vacuums.

Final thoughts on vacuum cleaner maintenance

Vacuum cleaners  needs maintenance like any other appliance in the home. It can sometimes need extra care due to its many parts. It is simple to do this if you know what it requires and how to do it.

It’s easy to keep your vacuum cleaner in top shape and takes very little time. A few minutes of maintenance can extend the life of your vacuum cleaner by years. Although replacing a vacuum cleaner is expensive, it can be done quickly and painlessly by following the tips.

Read More: Is Baking Cake easy in Microwave Oven?